Vivo V29 Pro is a premium smartphone from Vivo, with a 6.56-inch AMOLED display, a Snapdragon 888 processor, and a 64MP quad-camera setup. However, some users have reported that their Vivo V29 Pro power button stopped working, or became unresponsive or stuck. This can be very annoying and inconvenient, as the power button is used to turn on, lock, or restart the phone. If you are facing this problem, and you want to replace the power button yourself, you will need some tools, skills, and patience. In this blog post, we will show you how to replace the Vivo V29 Pro power button, in a step-by-step guide.
{jistoc} $title={Table of Contents}
Disclaimer
Before we start, we want to warn you that replacing the power button on your own may void your warranty, and may cause further damage to your phone, if you are not careful or experienced. Therefore, we recommend that you take your phone to a professional service center, or contact the Vivo customer service, for the best solution. However, if you still want to replace the power button yourself, you will need to take full responsibility for the outcome, and follow the instructions carefully. We will not be liable for any damage or loss that may occur during or after the process.
Tools You Will Need
To replace the Vivo V29 Pro power button, you will need the following tools:
A compatible power button for the Vivo V29 Pro. You can buy one online, such as this one, or from a local store.
- A SIM ejector tool, or a paper clip, to remove the SIM card tray.
- A heat gun, or a hair dryer, to soften the adhesive that holds the back cover.
- A suction cup, or a pry tool, to lift the back cover.
- A spudger, or a plastic tool, to disconnect the connectors and cables.
- A Phillips screwdriver, to remove the screws that secure the power button and the motherboard.
- A pair of tweezers, to handle the small parts.
- A new adhesive, or a double-sided tape, to reattach the back cover.
14 Steps to Replace the Vivo V29 Pro Power Button
To replace the Vivo V29 Pro power button, you will need to follow these steps:
- Turn off your phone completely, and remove the SIM card tray, using the SIM ejector tool or the paper clip.
- Heat the edges of the back cover, using the heat gun or the hair dryer, for about a minute, to soften the adhesive.
- Attach the suction cup to the bottom of the back cover, and pull it up gently, to create a gap. Insert the pry tool into the gap, and slide it along the edges, to cut the adhesive. Be careful not to damage the fingerprint scanner cable, which is located near the top of the back cover.
- Remove the back cover, and disconnect the fingerprint scanner cable, using the spudger or the plastic tool.
- Remove the 12 screws that secure the metal plate, using the Phillips screwdriver, and lift the metal plate.
- Disconnect the battery connector, the display connector, and the antenna cable, using the spudger or the plastic tool.
- Remove the 3 screws that secure the motherboard, using the Phillips screwdriver, and lift the motherboard slightly.
- Disconnect the power button cable, which is located on the right side of the motherboard, using the spudger or the plastic tool.
- Remove the power button, using the tweezers, and replace it with the new one. Make sure that the new power button is aligned and secured properly.
- Reconnect the power button cable, and place the motherboard back in its position. Secure it with the 3 screws, using the Phillips screwdriver.
- Reconnect the battery connector, the display connector, and the antenna cable, using the spudger or the plastic tool.
- Place the metal plate back in its position, and secure it with the 12 screws, using the Phillips screwdriver.
- Reconnect the fingerprint scanner cable, and place the back cover back in its position. Press the edges firmly, to reattach the adhesive. You can also apply some new adhesive or double-sided tape, to ensure a better seal.
- Insert the SIM card tray, and turn on your phone. Test the power button, to see if it works properly.
Conclusion
You have successfully replaced the Vivo V29 Pro power button, by following the steps in this blog post. We hope that this guide has helped you to solve the Vivo V29 Pro power button problem, and to enjoy your Vivo V29 Pro smartphone to the fullest. If you have any questions or feedback, please leave a comment below. Thank you for reading.